How to solve the problem of anti blocking of mold temperature machine pipeline

When choosing equipment, customers must not choose some "three noes" products. There is no necessary pipeline anti blocking design, which will not only increase the operation cost of the equipment, but also bring serious safety risks. So, what are the configurations of Xinli steel intelligent mold temperature machine to prevent pipeline blockage?

1. By-pass pressure relief circuit.

2. The oil / water filter at the inlet of the system shall be cleaned regularly, and the filter screen generally does not need to be replaced.

3. Some models: automatic drain valve, automatic drain.

4. Pressure relief device: pressure relief valve.

5. Pressure protection system: when the pipeline is blocked and the system pressure exceeds the limit, the equipment will automatically stop running.

6. Overtemperature protection function: when the pipeline is blocked and the system temperature exceeds the limit, the equipment will automatically stop heating.

In addition, what are the precautions for the pipeline when using a series of products such as mold temperature machine, oil temperature machine, water temperature machine, cold and hot integrated machine, electric heating heat conduction oil furnace and explosion-proof mold temperature machine?

1. The filter must be cleaned regularly to avoid impurities and foreign matters in the system, which will affect the safety of the pump and the system.

2. The pipeline system, pressure gauge, pressure controller and pressure relief valve shall be inspected regularly to ensure normal operation.

3. If the cooling tower is used, the cooling tower must be cleaned regularly, especially in summer, to avoid microbial breeding. If necessary, use detergent for cleaning.

The above is about the precautions for the use of the anti blocking configuration of the mold temperature machine. If you have any questions about the use of the equipment, you can call our company at any time.